×
Produits ajoutés au panier
    Livraison gratuite
    (0)
    M4Key Products

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable

    Code de stock M4-3002
    Catégories Dashboard Test Cables
    Marques M4Key Products
    Étiquettes GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable
    €55,00
    Stock épuisé
    Créer une demande

    Caractéristiques du produit

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with
    BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable

    Can be used with all devices!

     

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write

    GOLDCAR VW Audi Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable supports VW Audi Skoda Seat and other models, and performs offline BOOT PIN data reading and writing. lt is for dashboards key programming (including Boot Probe).of all UDS systems of Volkswagen, Skoda and Seat. The product can display the current working voltage and current, has a power switch, the simulation ignition switch, and a buzzer to prompt the ignition start and shut down. It supports CANH UDS communication indication, CR2032 remote key battery detection, key and IMMO instrument synchronization test, intelligent IMMO system emergency start area induction detection, IMMO combination instrument offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions.

    It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor,
    AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, Lonsdor, SUPER VAG, AUTEL, etc.

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation Functions:

    1. Use BOOT PIN to read and write data to the dashboard.
    2. Offline connection to the dashboard to convert to standard OBD2.
    3. Perform key chip and instrument synchronization test.
    4. Independent power switch
    5. Simulate ignition switch
    6. The BOOT PIN is more stable to hold and it does not damage the cable.

    BOOT PIN usage steps:

    1. Connect the power supply .
    2. Press the IGN ignition power .
    3. Connect the instrument plug.
    4. Find the BOOT PIN connection point of the corresponding instrument and connect it with a probe.
    5. Turn on the power switch for about 3-5 seconds. As long as the instrument ABS light is flashing,
      it means that the BOOT  PIN read and write mode has been entered.

    Description du produit

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with
    BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable

    Can be used with all devices!

     

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write

    GOLDCAR VW Audi Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable supports VW Audi Skoda Seat and other models, and performs offline BOOT PIN data reading and writing. lt is for dashboards key programming (including Boot Probe).of all UDS systems of Volkswagen, Skoda and Seat. The product can display the current working voltage and current, has a power switch, the simulation ignition switch, and a buzzer to prompt the ignition start and shut down. It supports CANH UDS communication indication, CR2032 remote key battery detection, key and IMMO instrument synchronization test, intelligent IMMO system emergency start area induction detection, IMMO combination instrument offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions.

    It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor,
    AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, Lonsdor, SUPER VAG, AUTEL, etc.

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation Functions:

    1. Use BOOT PIN to read and write data to the dashboard.
    2. Offline connection to the dashboard to convert to standard OBD2.
    3. Perform key chip and instrument synchronization test.
    4. Independent power switch
    5. Simulate ignition switch
    6. The BOOT PIN is more stable to hold and it does not damage the cable.

    BOOT PIN usage steps:

    1. Connect the power supply .
    2. Press the IGN ignition power .
    3. Connect the instrument plug.
    4. Find the BOOT PIN connection point of the corresponding instrument and connect it with a probe.
    5. Turn on the power switch for about 3-5 seconds. As long as the instrument ABS light is flashing,
      it means that the BOOT  PIN read and write mode has been entered.


    Commentaires (0)

    Vous devez vous connecter à votre compte pour évaluer le produit. Se connecter

    Aucun commentaire n'a été ajouté pour ce produit. Voulez-vous être le premier à ajouter un commentaire ?

    Produits récemment consultés

    Voir tout
    Livraison gratuite
    Power Fast AC Adapter For CGDI MB Tool
    Goldcar Products

    Power Fast AC Adapter For CGDI MB Tool

    €50,00
    €40,00
    %20 Réduction.
    Livraison gratuite
    Xhorse VVDI BE Key Pro Improved Version MB Yellow Board without Tokens/ Points
    XHORSE

    Xhorse VVDI BE Key Pro Improved Version MB Yellow ...

    €12,00
    Abonnieren Sie unser E-Bulletin!

    Si vous ne voulez pas manquer nos campagnes et réductions saisonnières, abonnez-vous à notre newsletter !

    Accueil
    Devenez revendeur
    Panier
    Contact
    Mon compte
    Panier (

    0

    )
    Votre panier est vide.
    Si vous souhaitez acheter un produit, rendez-vous sur la page du produit que vous souhaitez acheter.
    Faire les courses