×
Produkte zum Warenkorb hinzugefügt.
    Kostenloser Versand
    (0)
    M4Key Products

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable

    Lagercode M4-3002
    Kategorien Dashboard Test Cables
    Marken M4Key Products
    Schlagwörter GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable
    €55,00
    Ausverkauft
    Anfrage erstellen

    Produkteigenschaften

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with
    BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable

    Can be used with all devices!

     

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write

    GOLDCAR VW Audi Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable supports VW Audi Skoda Seat and other models, and performs offline BOOT PIN data reading and writing. lt is for dashboards key programming (including Boot Probe).of all UDS systems of Volkswagen, Skoda and Seat. The product can display the current working voltage and current, has a power switch, the simulation ignition switch, and a buzzer to prompt the ignition start and shut down. It supports CANH UDS communication indication, CR2032 remote key battery detection, key and IMMO instrument synchronization test, intelligent IMMO system emergency start area induction detection, IMMO combination instrument offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions.

    It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor,
    AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, Lonsdor, SUPER VAG, AUTEL, etc.

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation Functions:

    1. Use BOOT PIN to read and write data to the dashboard.
    2. Offline connection to the dashboard to convert to standard OBD2.
    3. Perform key chip and instrument synchronization test.
    4. Independent power switch
    5. Simulate ignition switch
    6. The BOOT PIN is more stable to hold and it does not damage the cable.

    BOOT PIN usage steps:

    1. Connect the power supply .
    2. Press the IGN ignition power .
    3. Connect the instrument plug.
    4. Find the BOOT PIN connection point of the corresponding instrument and connect it with a probe.
    5. Turn on the power switch for about 3-5 seconds. As long as the instrument ABS light is flashing,
      it means that the BOOT  PIN read and write mode has been entered.

    Produktbeschreibung

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with
    BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable

    Can be used with all devices!

     

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write

    GOLDCAR VW Audi Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable supports VW Audi Skoda Seat and other models, and performs offline BOOT PIN data reading and writing. lt is for dashboards key programming (including Boot Probe).of all UDS systems of Volkswagen, Skoda and Seat. The product can display the current working voltage and current, has a power switch, the simulation ignition switch, and a buzzer to prompt the ignition start and shut down. It supports CANH UDS communication indication, CR2032 remote key battery detection, key and IMMO instrument synchronization test, intelligent IMMO system emergency start area induction detection, IMMO combination instrument offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions.

    It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor,
    AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, Lonsdor, SUPER VAG, AUTEL, etc.

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation Functions:

    1. Use BOOT PIN to read and write data to the dashboard.
    2. Offline connection to the dashboard to convert to standard OBD2.
    3. Perform key chip and instrument synchronization test.
    4. Independent power switch
    5. Simulate ignition switch
    6. The BOOT PIN is more stable to hold and it does not damage the cable.

    BOOT PIN usage steps:

    1. Connect the power supply .
    2. Press the IGN ignition power .
    3. Connect the instrument plug.
    4. Find the BOOT PIN connection point of the corresponding instrument and connect it with a probe.
    5. Turn on the power switch for about 3-5 seconds. As long as the instrument ABS light is flashing,
      it means that the BOOT  PIN read and write mode has been entered.


    Bewertungen (0)

    Um das Produkt zu bewerten, müssen Sie sich anmelden. Anmelden

    Für dieses Produkt wurden noch keine Bewertungen abgegeben. Möchten Sie der Erste sein?

    Zuletzt angesehene Produkte

    Alle anzeigen
    Kostenloser Versand
    Power Fast AC Adapter For CGDI MB Tool
    Goldcar Products

    Power Fast AC Adapter For CGDI MB Tool

    €50,00
    €40,00
    %20 Rabatt
    Kostenloser Versand
    Xhorse VVDI BE Key Pro Improved Version MB Yellow Board without Tokens/ Points
    XHORSE

    Xhorse VVDI BE Key Pro Improved Version MB Yellow ...

    €12,00
    Abonnieren Sie unser E-Bulletin!

    Wenn Sie unsere saisonalen Aktionen und Rabatte nicht verpassen möchten, abonnieren Sie unseren Newsletter!

    Startseite
    Werden Sie Händler
    Warenkorb
    Kontakt
    Mein Konto
    Warenkorb (

    0

    )
    Ihr Warenkorb ist leer.
    Wenn Sie ein Produkt kaufen möchten, gehen Sie zur Seite des gewünschten Produkts.
    Einkaufen