×
Ürünler Sepete Eklendi
    Kargo Bedava
    (0)
    M4Key Products

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable

    Stok Kodu M4-3002
    Kategoriler Dashboard Test Cables
    Markalar M4Key Products
    Etiketler GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable
    €55,00
    Stok Tükenmiş
    Talep Oluştur

    Ürün Özellikleri

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with
    BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable

    Can be used with all devices!

     

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write

    GOLDCAR VW Audi Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable supports VW Audi Skoda Seat and other models, and performs offline BOOT PIN data reading and writing. lt is for dashboards key programming (including Boot Probe).of all UDS systems of Volkswagen, Skoda and Seat. The product can display the current working voltage and current, has a power switch, the simulation ignition switch, and a buzzer to prompt the ignition start and shut down. It supports CANH UDS communication indication, CR2032 remote key battery detection, key and IMMO instrument synchronization test, intelligent IMMO system emergency start area induction detection, IMMO combination instrument offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions.

    It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor,
    AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, Lonsdor, SUPER VAG, AUTEL, etc.

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation Functions:

    1. Use BOOT PIN to read and write data to the dashboard.
    2. Offline connection to the dashboard to convert to standard OBD2.
    3. Perform key chip and instrument synchronization test.
    4. Independent power switch
    5. Simulate ignition switch
    6. The BOOT PIN is more stable to hold and it does not damage the cable.

    BOOT PIN usage steps:

    1. Connect the power supply .
    2. Press the IGN ignition power .
    3. Connect the instrument plug.
    4. Find the BOOT PIN connection point of the corresponding instrument and connect it with a probe.
    5. Turn on the power switch for about 3-5 seconds. As long as the instrument ABS light is flashing,
      it means that the BOOT  PIN read and write mode has been entered.

    Ürün Açıklaması

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with
    BOOT PIN to Read & Write VAG UDS Dashboard Bench Cable

    Can be used with all devices!

     

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with BOOT PIN to Read & Write

    GOLDCAR VW Audi Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable supports VW Audi Skoda Seat and other models, and performs offline BOOT PIN data reading and writing. lt is for dashboards key programming (including Boot Probe).of all UDS systems of Volkswagen, Skoda and Seat. The product can display the current working voltage and current, has a power switch, the simulation ignition switch, and a buzzer to prompt the ignition start and shut down. It supports CANH UDS communication indication, CR2032 remote key battery detection, key and IMMO instrument synchronization test, intelligent IMMO system emergency start area induction detection, IMMO combination instrument offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions.

    It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor,
    AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, Lonsdor, SUPER VAG, AUTEL, etc.

    GOLDCAR VW Audi CAN-Bus UDS 4th Generation Functions:

    1. Use BOOT PIN to read and write data to the dashboard.
    2. Offline connection to the dashboard to convert to standard OBD2.
    3. Perform key chip and instrument synchronization test.
    4. Independent power switch
    5. Simulate ignition switch
    6. The BOOT PIN is more stable to hold and it does not damage the cable.

    BOOT PIN usage steps:

    1. Connect the power supply .
    2. Press the IGN ignition power .
    3. Connect the instrument plug.
    4. Find the BOOT PIN connection point of the corresponding instrument and connect it with a probe.
    5. Turn on the power switch for about 3-5 seconds. As long as the instrument ABS light is flashing,
      it means that the BOOT  PIN read and write mode has been entered.


    Yorumlar (0)

    Ürünü değerlendirmek için hesabınıza giriş yapmalısınız. Giriş Yap

    Bu ürüne hiç yorum yapılmamış, ilk yorum yapan sen olmak ister misin?

    Son İncelenen Ürünler

    Tümünü Gör
    Kargo Bedava
    Power Fast AC Adapter For CGDI MB Tool
    Goldcar Products

    Power Fast AC Adapter For CGDI MB Tool

    €50,00
    €40,00
    %20 İndirim
    Kargo Bedava
    Xhorse VVDI BE Key Pro Improved Version MB Yellow Board without Tokens/ Points
    XHORSE

    Xhorse VVDI BE Key Pro Improved Version MB Yellow ...

    €12,00
    E-Bültenimize üye olun!

    Dönemsel kampanyalarımızı ve indirimleri kaçırmak istemiyorsanız bültenimize abone olun !

    Anasayfa
    Bayi Ol
    Sepet
    İletişim
    Hesabım
    Sepet (

    0

    )
    Sepetinizde ürün bulunmamaktadır.
    Eğer bir ürün satın almak istiyorsanız almak istediğiniz ürünün sayfasına gidiniz.
    Alışveriş Yap